Evaluación de la influencia del tratamiento térmico de temple en el comportamiento al desgaste de una superaleación base cobalto con adición 0,3% de nitrógeno
| dc.contributor.advisor | Muñoz Bello, Nicolas Gabriel | |
| dc.contributor.author | Cardona García, Yeimy Paola | |
| dc.contributor.author | Molano Ramos, Ana Raquel | |
| dc.date.accessioned | 2025-03-11T16:39:46Z | |
| dc.date.available | 2025-03-11T16:39:46Z | |
| dc.date.created | 2025-02-04 | |
| dc.description | En el presente trabajo se realizó una superaleación base cobalto con adición 0,3% de nitrógeno. Una vez obtenida la aleación se tomaron muestras y se sometieron a tratamiento térmico (MCT) algunas y otras se dejaron sin tratamiento térmico (MST). A estas aleaciones se le realizaron caracterizaciones como EDS, SEM, microscopía óptica y de barrido, dureza y desgaste. En la aleación sin tratamiento térmico (MST) se encontró una microestructura heterogénea con inclusiones ricas en Cr y Mo las cuales contribuyeron al refuerzo de la estructura y aumento la dureza, la dureza encontrada fue de 286,06 ± 8,80 Hv. Sin embargo, esta microestructura podría ser más susceptible a la fragilidad dado su distribución desigual de fases. La muestra sin tratamiento térmico (MST) presentó una rugosidad promedio de 0.351 µm y un volumen del material desplazado de 1.88 mm3 con un mayor rugosidad, heterogeneidad y desgaste acumulado en comparación a la muestra tratada térmicamente (MCT) la cual presentó una rugosidad promedio de 0.241 µm y un volumen de 1.67 mm3. | |
| dc.description.abstract | In the present document, a cobalt-based superalloy was made with the addition of 0.3% nitrogen. Once the alloy was obtained, samples were taken and subjected to heat treatment (MCT), some and others were left without heat treatment (MST). Characterizations such as EDS, SEM, optical and scanning microscopy, hardness and wear were carried out on these alloys. In the alloy without heat treatment (MST), a heterogeneous microstructure was found with inclusions rich in Cr and Mo which contributed to the reinforcement of the structure and increased hardness. The hardness found was 286.06 ± 8.80 Hv. However, this microstructure could be more susceptible to brittleness given its uneven phase distribution. The sample without heat treatment (MST) presented an average roughness of 0.351 µm and a volume of the displaced material of 1.88 mm3 with greater roughness, heterogeneity and accumulated wear compared to the thermally treated sample (MCT) which presented an average roughness of 0.241 µm and a volume of 1.67 mm3. | |
| dc.description.sponsorship | Universidad Michoacana de San Nicolás de Hidalgo | |
| dc.format.mimetype | ||
| dc.identifier.uri | http://hdl.handle.net/11349/93501 | |
| dc.language.iso | spa | |
| dc.publisher | Universidad Distrital Francisco José de Caldas | |
| dc.relation.references | Al-Jawad, M., & Rack, H. (2003). Microstructure Evolution and Mechanical Properties of Wrought Co–Cr–Mo Alloys Following Thermomechanical Processing. Materials Science and Engineering. | |
| dc.relation.references | Alvarado, C., & Ruiz, A. (2018). Influencia del tiempo de tratamiento isotérmico en un acero con contenido de silicio cercano al 1,5% y deformado plásticamente en 65% en la formación de bainita [Universidad Distrital Francisco José De Caldas]. http://hdl.handle.net/11349/16019 | |
| dc.relation.references | ASM International Handbook Committee. (1991). Metals Handbook, Volume 4: Heat Treating. ASM International. | |
| dc.relation.references | ASTM. (2021). Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test. ASTM G77-98. ASTM International. | |
| dc.relation.references | ASTM. (2022, noviembre 7). Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test—ASTM G77-17. ASTM INTERNATIONAL. https://www.astm.org/g0077-17.html | |
| dc.relation.references | ASTM International. (2017). Standard Guide for Preparation of Metallographic Specimens (ASTM E3-11). | |
| dc.relation.references | Baraja, S. (2015). Comportamiento tribológico de aleaciones Cobalto-Cromo para su uso como biomateriales [Tesis pregrado, Universidad De Valladolid]. https://uvadoc.uva.es/bitstream/handle/10324/19657/TFG-I-485.pdf?sequence=1&isAllowed=y | |
| dc.relation.references | Bhadeshia, H. K. D. H. (2001). Metallic Materials and Phase Transformations. Institute of Materials. | |
| dc.relation.references | Bisbal, R., Dávila, P., González, G., Pérez, M., & Durán, F. (s. f.). Cambios Microestructurales Obtenidos en Aleaciones Ti-Al-V-Ta Tratadas Térmicamente. https://www.researchgate.net/publication/268005708_Cambios_Microestructurales_Obtenidos_en_Aleaciones_Ti-Al-V-Ta_Tratadas_Termicamente#pf2 | |
| dc.relation.references | Blanco, S., & Quintero, A. (2023). Efecto de la adición de nitrógeno y de la solidificación dinámica en la microestructura, dureza y resistencia al desgaste de un hierro blanco alto-cromo [Tesis, Universidad Distrital Francisco José De Caldas]. http://hdl.handle.net/11349/35576 | |
| dc.relation.references | Calderón, J. (2015). Estudio de evolución microestructural de una superaleación base Ni-Cr-Mo bajo diferentes condiciones termomecánicas. Universidad Autónoma De Nuevo León. | |
| dc.relation.references | Callister, W. (2017). Materiales de ingeniería y ciencia de los materiales (9a ed.) (9.a ed.). Wiley. | |
| dc.relation.references | Cano, J. (2017). Caracterización de superaleaciones base Co para aplicaciones en ambientes extremos [Tesis, Universidad Carlos III de Madrid]. https://hdl.handle.net/10016/28256 | |
| dc.relation.references | Cárdenas, J., & Díaz, F. (2015). Lecturas para ingeniería No. 23 “Superaleaciones”. Universidad Nacional Autónoma De México. http://olimpia.cuautitlan2.unam.mx/pagina_ingenieria/mecanica/mat/mat_mec/m6/superaleaciones.pdf | |
| dc.relation.references | Cheng, X., Guo, Q., Liu, C., & Ma, Z. (2024, junio 15). Simultaneous enhancement of elevated temperature strength and ductility in additive manufactured nickel-based superalloy via doping Y2O3 nanoparticles. Journal of Materials Science & Technology, 210, 13. | |
| dc.relation.references | Chung, D.-W., Toinin, J., Lass, E., Seidman, D., & Dunand, D. (2020, marzo 30). Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high g’ volume fraction. Journal of Alloys and Compounds, 832, 10. | |
| dc.relation.references | Clemens, S., O´Daffer, P., & Cooney, T. (1998). Geometría (1.a ed.). Pearson Educación. | |
| dc.relation.references | Córdoba, J. (2007). Reacciones de Auto-Propagación Inducidas Mediante Energía Mecánica (MSR): Sistemas MetalT – Carbono—Nitrógeno. [Instituto de Ciencia de Materiales de Sevilla]. http://hdl.handle.net/10261/8178 | |
| dc.relation.references | Cui, C., Antonsson, T., & Guo, Z. (2012). Phase Transformation in a Multicomponent Co–Cr–Mo Alloy. Materials Science and Engineering. DOI: 10.1016/j.msea.2012.06.033 | |
| dc.relation.references | Davis, J. (2001). Alloying: Understanding the Basics. ASM International. | |
| dc.relation.references | Delgado, J. (2020, septiembre 24). Metalografía [Perfil profesional]. Metalografía. https://www.linkedin.com/pulse/metalograf%C3%ADa-jorge-delgado-/ | |
| dc.relation.references | Dhanraj, P., & Mahajan, M. (2016). Effects of heat treatment on the hardness and microstructure of Co-Cr-Mo alloy. Materials Science and Engineering, 275-283. | |
| dc.relation.references | Eurolab, L. S. (s. f.). EN ISO 6507-2 Materiales metálicos—Prueba de dureza Vickers—Parte 2: Prueba estándar para verificación y calibración de máquinas de prueba. Laboratorio de prueba de metales. https://www.laboratuar.com/es/testler/metal-test-laboratuvari/en-iso-6507-2-metalik-malzemeler---vickers-sertlik-testi---bolum-2:-test-makinelerinin-dogrulanmasi-ve-kalibrasyonu-icin-standart-test/ | |
| dc.relation.references | Feng, H., Han, Y., Li, H.-B., Tian, Y.-Z., Zhu, H.-C., Jiang, Z.-H., He, T., & Zhou, G. (2022, octubre 17). Enhancement in impact toughness of CoCrFeMnNi high-entropy alloy via nitrogen addition. Journal of Alloys and Compounds, 932, 9. | |
| dc.relation.references | Fernandes, P., Niinomi, M., Liu, H., Cho, K., Nakai, M., Trenggono, A., Champagne, S., Hermawan, H., & Narushima, T. (2016, julio 20). Improvement of microstructure, mechanical and corrosion properties of biomedical Ti-Mn alloys by Mo addition. Materials And Desing, 110, 11. | |
| dc.relation.references | Gadelmawla, E. S., Koura, M. M., Maksoud, T. M. A., Elewa, I. M., & Soliman, H. H. (2002). Roughness parameters. Journal of Materials Processing Technology. | |
| dc.relation.references | García, E. (2024, febrero 25). Los reactores nucleares modulares pequeños están muy cerca de ser una realidad y cambiarlo todo. La Vanguardia. https://www.lavanguardia.com/andro4all/tecnologia/los-reactores-nucleares-modulares-pequenos-estan-muy-cerca-de-ser-una-realidad-y-cambiarlo-todo | |
| dc.relation.references | Goldstein, J., Newbury, D., Joy, D., Lyman, C., Echlin, P., Lifshin, E., & Michael, J. (2017). Scanning Electron Microscopy and X-Ray Microanalysis. Springer. | |
| dc.relation.references | Guerra, F., Bedolla, A., Leon, & Vásquez. (2023, marzo 24). The effect of small additions of Nb and Ti on the sliding wear behavior of a Co–30Cr–5Mo alloy. WEAR, 522, 18. | |
| dc.relation.references | Guo, X., Zhang, P., Li, H., & Wang, M. (2023, septiembre 1). Design and performance of nitrogen-alloyed iron-based coating for enhancing galling resistance by plasma transferred arc welding. Materials Letters, 346, 9. | |
| dc.relation.references | Hewitt, P. (2004). Fisica Conceptual (9na ed) (9.a ed.). Pearson Educación. https://jbfisica.wordpress.com/wp-content/uploads/2017/01/fc3adsica-conceptual-hewit.pdf | |
| dc.relation.references | Higgins, R. (2006). Engineering Materials 1: An Introduction to Properties and Applications. | |
| dc.relation.references | Hood, D. W., & Richmond, J. R. (2001). Casting and Solidification of Molten Metals. Elsevier Science. | |
| dc.relation.references | Hutchings, I. M., & Shipway, P. (2017). Tribology: Friction and Wear of Engineering Materials (2.a ed.). Butterworth-Heinemann. | |
| dc.relation.references | International Organization for Standardization. (1997). Geometrical Product Specifications (GPS)—Surface texture: Profile method—Terms, definitions and surface texture parameters. ISO 4287:1997. | |
| dc.relation.references | JMatPro Software Documentation. (s. f.). Sente Software. https://www.sentesoftware.co.uk/ | |
| dc.relation.references | Kaufman, J. G. (2004). Aluminum Alloy Casting: Properties, Processes, and Applications. ASM International. | |
| dc.relation.references | Kawasaki, K., & Fukui, T. (1996). Effect of argon gas injection on the fluidity of molten metals in casting processes. Journal of Materials Processing Technology. | |
| dc.relation.references | Kim, S., Kim, G., Song, S., & Kim, J. (2023, noviembre). Effects of Cr and Mo contents on the flow-accelerated corrosion behavior of low alloy steels in the secondary side of pressurized water reactors. Journal of Nuclear Materials, 585. https://www.sciencedirect.com/science/article/abs/pii/S0022311523004208 | |
| dc.relation.references | Kohl, S. D., & Smith, D. J. (2001). Metals Handbook: Casting. 10th edition. ASM International. | |
| dc.relation.references | Korashy, A., Attia, H., Thomson, V., & Skooei, S. (2020, enero 3). Fretting wear behavior of cobalt—Based superalloys at high temperature – A comparative study. TRIBOLOGY INTERNATIONAL, 145, 8. | |
| dc.relation.references | Lima, J., Antunes, R., & Costa, I. (2010). Study of the Corrosion Behavior of the ASTM F75 Co–Cr Alloy Processed by Powder Metallurgy in a Physiological Solution. Materials Research. | |
| dc.relation.references | Llaneza, J., Cerpa, A., & Carsi, M. (2018). Optimización del conformado de una superaleación experimental. SOCIE MAT, 4 | |
| dc.relation.references | Manterola, C., Grande, L., Otzen, T., Garcia, N., Salazar, P., & Quiroz, G. (2018). Confiabilidad, precisión o reproducibilidad de las mediciones. Métodos de valoración, utilidad y aplicaciones en la práctica clínica. Revista chilena de infectología, 35. http://dx.doi.org/10.4067/S0716-10182018000600680 | |
| dc.relation.references | Mcneil, W. H. (1992). The Rise of the West: A History of the Human Community (íntegra). University of Chicago Press. https://press.uchicago.edu/ucp/books/book/chicago/R/bo3645507.html | |
| dc.relation.references | Molera, P. (1990). Metales resistentes a la corrosión: Vol. 35 de Colección Prodúctica (ilustrada ed.). MARCOMBO S.A. https://books.google.es/books?hl=es&lr=&id=YOGsVVd5sUoC&oi=fnd&pg=PA5&dq=adici%C3%B3n+de+arg%C3%B3n+a+aleaciones+cobalto+cromo+molibdeno&ots=1dQy23Q28D&sig=xTHEewUbvsn3jUWbH64DsEb78mI#v=onepage&q&f=false | |
| dc.relation.references | Nagels, B., Schuurman, M., Chapovsky, P., & Hermans, L. (1996, septiembre 1). Nuclear spin conversion in molecules: Experiments on 13CH3 F support a mixing-of-states model. The American Physical Society, physical Review A, 54(1996). https://doi.org/10.1103/PhysRevA.54.2050?_gl=1*1pj63cc*_gcl_au*MTc0MjQ0MDQ4MC4xNzMzNDIwMTk0*_ga*MTcyOTE2Mjk4MC4xNzMzNDIwMTkz*_ga_ZS5V2B2DR1*MTczMzQyMDE5NC4xLjAuMTczMzQyMDE5NC42MC4wLjQxMDIzOTMyMA.. | |
| dc.relation.references | Ortiz, D. (2017). Caracterización de una aleación TI6AL4V obtenida mediante electron beam melting y su evolución con posteriores tratamientos térmicos para mejorar las propiedades mecánicas [Proyecto/Trabajo fin de carrera/grado, UNIVERSITAT POLITÈCNICA DE VALÈNCIA]. https://riunet.upv.es/handle/10251/94445 | |
| dc.relation.references | Padilla, D. (2017). Evaluación del efecto de la adición de plata en aleaciones Ti-35NB obtenidas mediante pulvimetalúrgica convencional, por su efecto antibacteriano [Tesis, UNIVERSITAT POLITECNICA DE VALENCIA]. https://riunet.upv.es/handle/10251/107763 | |
| dc.relation.references | Prakash, U., & Gogia, A. (2010). Development of Co-Cr-Mo alloys for biomedical applications. Advanced Engineering Materials. | |
| dc.relation.references | Prasat, G. V., Naguesha, A., Sandhya, R., Sancaran, S., Mathew, M. D., & Bhanu, K. (2015, febrero). Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content. Metallurgical and Materials Transactions A, 46(2), 14. | |
| dc.relation.references | Raghavan, V. (2015). Phase Diagrams and Microstructural Engineering. Springer. | |
| dc.relation.references | Rao, R. (2012). Physical Metallurgy of Steels. John Wiley & Sons. | |
| dc.relation.references | Rectificado cilíndrico. (s. f.). Mecaplus. https://www.directindustry.es/prod/mecaplus/product-197896-2176539.html | |
| dc.relation.references | Redondo, M. I., Díaz, C. A., & Buchelli, G. A. (2021). Indices de producción para el sector metalmecánica en Colombia. REVISTA VENEZOLANA DE GERENCIA, 26(96), 17. | |
| dc.relation.references | Saunders, N., & Miodownik, A. (1998). CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide. Pergamon Press. | |
| dc.relation.references | Shi, D., Hao, W., Sui, T., Liu, C., Ru, Y., & Yang, X. (2024, julio 20). Low-cycle fatigue behavior of coated and uncoated single crystal Ni-based superalloy at various temperatures. International Journal of Fatigue, 188, 15. | |
| dc.relation.references | Sirotkin, R. O., & Sirotkin, O. S. (2018). Physico-chemical principles of universal methodology of controlling structure and properties of metallic and nonmetallic materials. Materials Science and Engineering, 327. 10.1088/1757-899X/327/4/042119 | |
| dc.relation.references | Smallman, R., & Ngan, A. (2014). Modern Physical Metallurgy. Butterworth-Heinemann. | |
| dc.relation.references | Stachowiak, G. W., & Batchelor, A. W. (2013). Engineering Tribology. Elsevier. | |
| dc.relation.references | Stevenson, P. J., & Ricks, R. A. (2005). Cobalt-based Superalloys. Materials Science and Technology: A Comprehensive Treatment. | |
| dc.relation.references | Stout, K. J., & Blunt, L. (2000). Three-Dimensional Surface Topography: Measurement, Interpretation and Applications. Butterworth-Heinemann. | |
| dc.relation.references | Sumner, D., Turner, T., Igloria, R., Urban, R., & Galante, J. (2003). Functional adaptation and bone ingrowth. Journal of Bone and Joint Surgery-American, 85. | |
| dc.relation.references | Sundararajan, V. (2009). Role of Alloying Elements in Controlling the Properties of Co–Cr–Mo Alloys for Biomedical Applications. Journal of Materials Science: Materials in Medicine. | |
| dc.relation.references | Superb, E. (s. f.). Horno de Fusión por Inducción al Vacío [Página comercial]. https://es.superbmelt.com/vacuum-induction-melting-furnace/#:~:text=El%20horno%20de%20inducci%C3%B3n%20al%20vac%C3%ADo%20elimina%20completamente%20los%20gases,el%20mismo%20nivel%20de%20consistencia | |
| dc.relation.references | TECNIMETAL. (2021, julio 1). ENSAYOS DE MICRODUREZA: PRINCIPIOS Y APLICACIONES. https://innovatest-iberica.es/?p=354 | |
| dc.relation.references | Vander, G. (2004). Metallography: Principles and Practice. ASM International. | |
| dc.relation.references | Vidagañ, J. (2023). Estudio de superaleaciones para su aplicación en álabes de turbinas de gas de alta presión y análisis de su desempeño mediante el método de elementos finitos [UNIVERSITAT POLITÈCNICA DE VALÈNCIA]. https://m.riunet.upv.es/handle/10251/205761 | |
| dc.relation.references | Weiss, D. (2019, febrero 1). Improved High-Temperature Aluminum Alloys Containing Cerium. Journal of Materials Engineering and Performance, 28, 6. | |
| dc.relation.references | Xiong, F., Fu, R., Li, Y., Xu, B., & Qi, X. (2020). Influences of nitrogen alloying on microstructural evolution and tensile properties of CoCrFeMnNi high-entropy alloy treated by cold-rolling and subsequent annealing. Materials Science and Engineering, 787, 27. | |
| dc.relation.references | Yamanaka, K., Mori, M., & Chiba, A. (2014, enero). Effects of nitrogen addition on microstructure and mechanical behavior of biomedical Co–Cr–Mo alloys. Journal of the Mechanical Behavior of Biomedical Materials, 29, 417-426. | |
| dc.relation.references | Yuan, C., Guo, J., & Zhou, L. (2011, julio 4). Effect of Nitrogen on Microstructure and Properties of a Cast Cobalt-Base Superalloy. Trans Tech Publications Ltd, Switzerland, 278, 7. | |
| dc.relation.references | Zhang, H., Sun, G., Yang, M., Yuan, F., & Wu, X. (2024, mayo 28). Simultaneous improvement of strength and ductility in a P-doped CrCoNi medium-entropy alloy. Journal of Materials Science & Technology, 209, 11. | |
| dc.relation.references | Zhang, X., Li, W., & Yang, F. (2016). Effects of heat treatment on microstructure and mechanical properties of high alloy steels. Journal of Alloys and Compounds. | |
| dc.relation.references | Zheng, Y., Li, B., Yang, J., Zhang, Z., & Chen, X. (2024, febrero 20). Insights into thermomechanical fatigue behavior of nitrogen alloyed 316LN stainless steel under various temperature cycling ranges. Journal of Materials Research and Technology, 29, 14. | |
| dc.rights.acceso | Abierto (Texto Completo) | |
| dc.rights.accessrights | OpenAccess | |
| dc.subject | Nitrógeno | |
| dc.subject | Superaleación | |
| dc.subject | Metalografía | |
| dc.subject | Resistencia al desgaste | |
| dc.subject.keyword | Nitrogen | |
| dc.subject.keyword | Superalloy | |
| dc.subject.keyword | Metallography | |
| dc.subject.keyword | Wear resistance | |
| dc.subject.lemb | Ingeniería Mecánica -- Tesis y disertaciones académicas | |
| dc.subject.lemb | Superaleaciones a base de cobalto | spa |
| dc.subject.lemb | Materiales avanzados | spa |
| dc.subject.lemb | Ingeniería de materiales | spa |
| dc.subject.lemb | Tratamiento térmico de temple | spa |
| dc.subject.lemb | Efecto del nitrógeno | spa |
| dc.title | Evaluación de la influencia del tratamiento térmico de temple en el comportamiento al desgaste de una superaleación base cobalto con adición 0,3% de nitrógeno | |
| dc.title.titleenglish | Evaluation of the influence of temple heat treatment on the wear behavior of a cobalt-based superalloy with addition of 0,3% nitrogen | |
| dc.type | bachelorThesis | |
| dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | |
| dc.type.degree | Monografía | |
| dc.type.driver | info:eu-repo/semantics/bachelorThesis |
Archivos
Bloque de licencias
1 - 1 de 1
No hay miniatura disponible
- Nombre:
- license.txt
- Tamaño:
- 7 KB
- Formato:
- Item-specific license agreed upon to submission
- Descripción: