Desarrollo de una mezcla asfáltica tibia bajo criterios técnicos y medioambientales

dc.contributor.authorRondón Quintana, Hugo Alexander
dc.contributor.authorZafra Mejía, Carlos Alfonso
dc.contributor.authorFernández Gómez, Wilmar Darío
dc.contributor.orcidRondón Quintana, Hugo Alexander [0000-0003-2946-9411]
dc.contributor.orcidFernández Gómez, Wilmar Darío [0000-0001-6339-8050]
dc.contributor.orcidZafra Mejía, Carlos Alfonso [0000-0002-4061-4897]
dc.date.accessioned2023-11-02T22:27:23Z
dc.date.available2023-11-02T22:27:23Z
dc.date.created2018-04
dc.descriptionEste libro presenta los resultados del proyecto de investigación “Desarrollo de una mezcla asfáltica tibia bajo criterios técnicos y medioambientales”, el cual fue financiado por el Centro de Investigaciones y Desarrollo Científico (CIDC) de la Universidad Distrital Francisco José de Caldas. El estudio buscó desarrollar una mezcla asfáltica amigable con el medio ambiente que experimentara propiedades reológicas, mecánicas y de durabilidad similar o superior a las de mezclas tradicionales de concreto asfáltico. Para tal fin se evaluó la respuesta físico-mecánica y reológica que experimentó una mezcla asfáltica tibia desarrollada en laboratorio, empleando un aditivo químico líquido denominado HUSIL. Este aditivo espuma los asfaltos colombianos a temperaturas cercanas a los 80°C, lo que permite disminuir la temperatura de fabricación y facilitar el recubrimiento del asfalto con los agregados pétreos a menores temperaturas. Dentro del documento, el lector encontrará el marco conceptual y el estado del conocimiento sobre el tema de estudio, la metodología empleada durante la ejecución del proyecto, los resultados y el análisis del estudio ejecutado, las conclusiones y las fuentes bibliográficas consultadas y referenciadas.spa
dc.description.abstractThis book presents the results of the research project “Development of a warm asphalt mixture under technical and environmental criteria”, which was financed by the Scientific Research and Development Center (CIDC) of the Francisco José de Caldas District University. The study sought to develop an environmentally friendly asphalt mixture that would experience rheological, mechanical and durability properties similar to or superior to those of traditional asphalt concrete mixtures. For this purpose, the physical-mechanical and rheological response experienced by a warm asphalt mixture developed in the laboratory was evaluated, using a liquid chemical additive called HUSIL. This additive foams Colombian asphalt at temperatures close to 80°C, which allows the manufacturing temperature to be reduced and facilitates the coating of the asphalt with stone aggregates at lower temperatures. Within the document, the reader will find the conceptual framework and the state of knowledge on the topic of study, the methodology used during the execution of the project, the results and analysis of the study carried out, the conclusions and the bibliographic sources consulted and referenced.spa
dc.description.cityBogotáspa
dc.format.mimetypepdfspa
dc.identifier.editorialUniversidad Distrital Francisco José de Caldas. Centro de Investigaciones y Desarrollo Científicospa
dc.identifier.isbn978-958-787-000-8spa
dc.identifier.urihttp://hdl.handle.net/11349/32605
dc.relation.ispartofseriesEspaciosspa
dc.relation.referencesAbtahi, S. M., Sheikhzadeh, M. y Hejazi, S. M. (2010). Fiber-Reinforced Asphalt Concrete – A Review. Construction and Building Materials, 24, 871–877.spa
dc.relation.referencesAI, A., Yi-qiu, T. y Hameed, A. T. (2011). Starch as a Modifier for Asphalt Paving Materials. Construction and Building Materials, 25, 14-20.spa
dc.relation.referencesAkisetty, C. K., Lee, S. J. y Amirkhanian, S. N. (2008). Volumetric properties of warm rubberized mixes depending on compaction temperature. Airfield and Highway Pavements 2008, ASCE, 205-212.spa
dc.relation.referencesAkisetty, C. K., Lee, S. J. y Amirkhanian, S. N. (2009). Effects of compaction temperature on volumetric properties of rubberized mixes containing warm-mix additives. J. Mater. Civ. Eng., 21(8), 409-415.spa
dc.relation.referencesAkisetty, C. K., Lee, S. J. y Amirkhanian, S. N. (2010). Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders. Int. J. Pavement Eng., 11(2), 153-160.spa
dc.relation.referencesAl-Rawashdeh, A. S. y Sargand, S. (2014). Performance assessment of warm asphalt binder in the presence of water by using surface free energy concepts and nanoscale techniques. J. Mater. Civ. Eng., 26(5), 803-811.spa
dc.relation.referencesAli, A., Abbas, A., Nazzal, M., Alhasan, A., Roy, A. y Powers, D. (2013a). Effect of temperature reduction, foaming water content, and aggregate moisture content on performance of foamed warm mix asphalt. Constr. Build. Mater, 48, 1058-1066.spa
dc.relation.referencesAli, A., Abbas, A., Nazzal, M., Alhasan, A., Roy, A. y Powers, D. (2013). Workability evaluation of foamed warm mix asphalt. J Mater Civ Eng., accepted to publish.spa
dc.relation.referencesAmato, F., Karanasiou, A., Moreno, T., Alastuey, A., Orza, J.A.G., Lumbreras, J., Borge, R., Boldo, E., Linares y Querol, X. (2012). Emission Factors from Road Dust Resuspension in a Mediterranean Freeway. Atmospheric Environment, 61, 580-587.spa
dc.relation.referencesAmeri, M., Hesami, S. y Goli, H. (2013). Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag. Constr. Buil. Mater, 49, 611-617.spa
dc.relation.referencesAnderson, R. M., Baumgardner, G., May, R. y Reinke, G. (2008). Engineering properties, emissions, and field performance of warm mix asphalt technology. Washington, DC: National Cooperative Highway Research Program (NCHRP).spa
dc.relation.referencesAPAO. (2003). Warm Mix Asphalt Shows Promise for Cost Reduction, Environmental Benefit. Centerline, Asphalt Pavement Association of Oregon, Salem, Oregon, Fall.spa
dc.relation.referencesArabani, M., Roshani, H. y Hamedi, G. H. (2012). Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method. J. Mater. Civ. Eng., 24(7), 889-897.spa
dc.relation.referencesArega, Z., Bhasin, A., Motamed, A. y Turner, F. (2011). Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents. J. Mater. Civ. Eng., 23(10), 1453-1459.spa
dc.relation.referencesArenas, H. L. (1999). Tecnología del cemento asfáltico. Fundación para Actividades de Investigación y Desarrollo, 299 pp.spa
dc.relation.referencesArenas, H. L. (2006). Teoría de los pavimentos. Universidad del Cauca, 396 pp.spa
dc.relation.referencesASOPAC. (2004). Cartilla del pavimento asfáltico. Bogotá: Asociación de Productores y Pavimentadores Asfálticos de Colombia.spa
dc.relation.referencesAsphalt Pavement Association of Oregon. (2003). Warm mix asphalt shows promise for cost reduction, environmental benefit. Salem, OR: APAO.spa
dc.relation.referencesAsplund, R., Mar, B.W. y Ferguson J.F. (1983). Total suspended Solids in Highway Runoff in Washington State. Environ. Eng., 109, 778-779, 1983.spa
dc.relation.referencesBahia, H. U., Fahim, A. y Nam, K. (2006). Prediction of compaction temperatures using binder rheology, transportation research, factors affecting compaction of asphalt pavements. Transportation Research Board. Number E-C105, 3-17.spa
dc.relation.referencesBall, J.E., Jenks, R. y Aubourg, D. (1998). An Assessment of the Availability of Pollutant Constituents on Road Surfaces. Science of the Total Environment, 209 (2), 243-254, Jan., 1998.spa
dc.relation.referencesBarthel, W., Marchand, J. P. y Devivere, M. V. (2004). Warm asphalt mixes by adding a synthetic zeolite. Proc., Eurasphalt y Eurobitume Congress, Eurasphalt y Eurobitume Congress, Viennaspa
dc.relation.referencesBaumgardner, G. (July, 2008). REVIX™–Waterless Technology for Production of Reduced Temperature Asphalt Mixtures. Presentation at the 2009 Petersen Asphalt Re- search Conference and P3 Symposium, Laramie, WY.spa
dc.relation.referencesBerbee, R., Rijs, G., Brouwer, R. y Velzen, L. (1999). Characterization and Treatment of Runoff From Highways in the Netherlands Paved With Impervious and Pervious Asphalt. Wat. Environ. Res., 71, 183-190.spa
dc.relation.referencesBian, B. y Zhu, W. (August, 2009). Particle Size Distribution and Pollutants in Road Deposited Sediments in Different Areas of Zhenjiang, China. Environmental Geochemistry and Health, 31 (4), 511-520.spa
dc.relation.referencesBehl, A., Kumar, G., Sharma, G. y Jain, P. K. (2013). Evaluation of field performance of warm-mix asphalt pavements in India. Procedia Soc. Behav. Sci., 104, 158-167.spa
dc.relation.referencesBehnia, B., Dave, E. V., Ahmed, S., Buttlar, W. G. y Reis, H. (2011). Effects of recycled asphalt pavement amounts on low-temperature cracking performance of asphalt mixtures using acoustic emissions. Transp. Res. Rec., 2208, 64-71.spa
dc.relation.referencesBhasin, A. y Little, D. N. (2007). Characterization of aggregate surface energy using the universal sorption device. J. Mater. Civ. Eng., 19(8), 634-641.spa
dc.relation.referencesBiro, S., Gandhi, T. y Amirkhanian, S. (2009a). Determination of zero shear viscosity of warm asphalt binders. Constr Buil Mater., 23, 2080-2086.spa
dc.relation.referencesBiro, S., Gandhi, T. y Amirkhanian, S. (2009). Midrange temperature rheological properties of warm asphalt binders. J. Mater. Civ. Eng., 21(7), 316-323.spa
dc.relation.referencesBlankendaal, T., Schuur, P. y Voordijk, H. (2014). Reducing the environmental impact of concrete and asphalt: a scenario approach. J. Clean Prod., 66, 27-36.spa
dc.relation.referencesBonaquist, R. (2005). Laboratory evaluation of hot mix asphalt (HMA) mixtures containing recycled or waste product materials using performance testing. Publication FHWA-PA-2005-006+98-32(19). Pennsylvania Department of Transportation, Office of Planning and Research.spa
dc.relation.referencesBonaquist, R. (2011). Mix design practices for warm mix asphalt. National Cooperative Highway Research Program - NCHRP Report 691, Washington DC: Transportation Research Board.spa
dc.relation.referencesBuddhala, A., Hossain, Z., Wasiuddin, N. M., Zaman, M. y O’Rear, E. A. (2011). Effects of an amine anti-stripping agent on moisture susceptibility of sasobit and aspha-min mixes by surface free energy analysis. J. Test. Eval., 40, 1-9.spa
dc.relation.referencesCapitão, S., Picado-Santos, L. y Martinho, F. (2012). Pavement engineering materials: review on the use of warm-mix asphalt. Construction and Building. Materials, 36, 1016-1024.spa
dc.relation.referencesCaro, S., Masad, E., Bhasin, A. y Little, D. N. (2008). Moisture Susceptibility of asphalt mixtures, part 1: mechanisms. Int. J. Pavement Eng., 9(2), 81-98.spa
dc.relation.referencesCasey, D.; McNally, C.; Gibneya, A. y Gilchrist, M. (2008). Development of a Recycled Polymer Modified Binder for Use in Stone Mastic Asphalt. Journal of Resources, Conservation and Recycling, 52, 1167-1174.spa
dc.relation.referencesCheng, D., Little, D. N., Lytton, R. L. y Holste, J. C. (2002). Use of surface free energy of asphalt-aggregate system to predict moisture damage potential. J. Assoc. Asphalt Paving Technol., 71, 59-88.spa
dc.relation.referencesCheng, J., Shen, J. y Xiao, F. (2011). Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime. J Mater Civ Eng., 23, 1552-1559.spa
dc.relation.referencesChoi, J. K. (2011). Visco-Elastic Analysis of the Elastomeric Binder Shear Resistance in Relation to Asphalt Rutting. Road Materials and Pavement Design, 12 (4), 767-794.spa
dc.relation.referencesChowdhury, A. y Button, J. W. (2008). A review of warm mix asphalt. Report n.° SWUTC/08/473700-00080-1. College Station: Texas Transportation Institute.spa
dc.relation.referencesCole, R.H., Frederick, R.E., Healy, R.P. y Rolan R.G. (1984). Preliminary Findings of the Priority Pollutant Monitoring Project of the Nationwide Urban Runoff Program. Water Pollut. Control Fed., 56, 898-908.spa
dc.relation.referencesConstantini, S. y Demetra, V. (May, 2005). Size Distribution of Airborne Particulate Matter and Associated Heavy Metals in the Roadside Environment. Chemosphere, 59 (8), 1197-1206.spa
dc.relation.referencesDiab, A., You, Z. y Wang, H. (2013). Rheological evaluation of foamed WMA modified with nano hydrated lime. Procedia Soc. Behav. Sci., 96, 2858-2866.spa
dc.relation.referencesDiefenderfer, S. D., McGhee, K. K. y Donaldson, B. M. (2007). Installation of warm mix asphalt projects in Virginia. Final report: VTRC 07-25. Charlottesville: Virginia Transportation Research Council.spa
dc.relation.referencesDoyle, J. D. y Howard, I. L. (2013). Rutting and moisture damage resistance of high reclaimed asphalt pavement warm mixed asphalt: loaded wheel tracking vs. conventional methods. Road Materials and Pavement Design, 14(S2), 148-172.spa
dc.relation.referencesDoyle, J. D. y Howard, I. L. (2013a). Thermal cracking potential of high RAP-WMA evaluated with bending beam rheometer mixture beam test. J. Test. Eval., 41, 1-11.spa
dc.relation.referencesEstakhri, C. K., Cao, R., Álvarez, A. y Button, J. W. (2009). Production, placement and performance evaluation of warm mix asphalt in Texas. GeoHunan International Conference 2009, ASCE, 1-8.spa
dc.relation.referencesEpps, A., Arambula, E., Estakhri, C., Epps, J., Park, E. S., Yin, F., Walubita, L. F. y Lytton, R. L. (2011). Performance of WMA technologies: Stage l – moisture susceptibility, Phase I. Interim Report Excerpted Literature Review for NCHRP Project 09-49, Transportation Research Board, National Academies, Washington, DC.spa
dc.relation.referencesEssumang, D.K., Dodoo, D.K., Obiri, S. y Oduro, B.A.K. (2006). Analysis of Vehicular Fallouts from Traffic in the Kumasi Metropolis, Ghana. Bull. Chem. Soc. Ethiop., 20, 9-15.spa
dc.relation.referencesFakhri, F., Ghanizadeh, A. R. y Omrani, H. (2013). Comparison of fatigue resistance of HMA and WMA mixtures modified by SBS. Procedia Soc. Behav. Sci., 104, 168-177.spa
dc.relation.referencesGandhi, T., Akisetty, Ch. y Amirkhanian, S. (2009). Laboratory evaluation of warm asphalt binder aging characteristics. Int. J. Pavement Eng., 10(5), 353-359.spa
dc.relation.referencesGandhi, T., Akisetty, C. y Amirkhanian, S. (2009a). A comparison of warm asphalt binder aging with laboratory aging procedures. J. Test Eval., 38, 1-8.spa
dc.relation.referencesGandhi, T. y Amirkhanian, S. (2008). Laboratory simulation of warm mix asphalt (WMA) binder aging characteristics. Airfield and Highway Pavements 2008, ASCE, 195-204.spa
dc.relation.referencesGandhi, T., Rogers, W. y Amirkhanian, S. (2010). Laboratory evaluation of warm mix asphalt ageing characteristics. Int. J. Pavement Eng., 11(2), 133-142.spa
dc.relation.referencesGehrig, R., Zeyer, K., Bukowiecki, N., Lienemann, P., Poulikakos, L.D., Furger, M. y Buchmann, B. (2010). Mobile Load Simulators - A Tool to Distinguish Between the Emissions Due to Abrasion and Resuspension of PM10 from Road Surfaces. Atmos. Envir., 44, 4937-4943.spa
dc.relation.referencesGhabchi, G., Singh, D., Zaman, M. y Tian, Q. (2013). Application of asphalt-aggregates interfacial energies to evaluate moisture-induced damage of warm mix asphalt. Procedia Soc. Behav. Sci., 104, 29-38.spa
dc.relation.referencesGhabchi, G., Singh, D., Zaman, M. y Tian, Q. (2013a). Mechanistic evaluation of the effect of WMA additives on wettability and moisture susceptibility properties of asphalt mixes. J. Test. Eval., 41, 1-10.spa
dc.relation.referencesGnecco I., Berretta, C., Lanza, L.G. y La-Barbera, P. (2005). Storm Water Pollution in the Urban Environment of Genoa, Italy. Atmos. Res., 77, 60-73.spa
dc.relation.referencesGoh, S. W., Hasan, M. R. y You, Z. (2013). Performances evaluation of Cecabase® RT in warm mix asphalt technology. Procedia Soc. Behav. Sci., 96, 2782-2790.spa
dc.relation.referencesGoh, S. W. y You, Z. (2012). Mechanical properties of porous asphalt pavement materials with warm mix asphalt and RAP. J. Transp. Eng., 138(1), 90-97.spa
dc.relation.referencesGoh, S. W. y You, Z. (2008). Resilient modulus and dynamic modulus of warm mix asphalt. GeoCongress 2008, ASCE, 1000-1007.spa
dc.relation.referencesGoh, S. W. y You, Z. (2009). Warm mix asphalt using Sasobit® in cold region. Cold Regions Engineering 2009, ASCE, 288-298.spa
dc.relation.referencesGustafsson, M., Blomqvist, G., Gudmundsson, A., Dahl, A., Swietlicki, E., Bohgard, M., Lindbom, J. y Ljungman, A. (2008). Properties and Toxicological Effects of Particles from the Interaction Between Tyres. Road Pavement and Winter Traction Material. J. Sci. Total Envir., 393, 226-240.spa
dc.relation.referencesHajj, E. Y., Souliman, M. I. y Cortez, E. M. (2014). Influence of warm mix additive on mechanistic, economical, and environmental attributes of a polymer-modified asphalt mixture. Adv. Civ. Eng. Mater., 3(1), 88-106.spa
dc.relation.referencesHamzah, M., O., Golchin, B. y Tye, C. T. (2013). Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method. Construction and Building. Materials, 47, 1328-1336.spa
dc.relation.referencesHamzah, M. O., Jamshidi, A., Kanitpong, K. y Aman, M.Y. (2012). Parameters to characterise the effects of Sasobit® content on the rheological properties of unaged and aged asphalt binders. Road Materials Pavement Design, 13(2), 368-375.spa
dc.relation.referencesHanz, A., Faheem, A., Mahmoud, E. y Bahia, H. (2010). Measuring effects of warmmix additives using a newly developed asphalt binder lubricity test for DSR. Transportation Research Board 89th Annual Meeting, Compendium of Papers DVD, Transportation Research Board of the National Academies, Washington, DC.spa
dc.relation.referencesHares, R.J. y Ward, N.I. (1999). Comparison of the Heavy Metal Content of Motorway Stormwater Following Discharge into Wet Biofiltration and Dry Detention Ponds Along the London Orbital (M25) Motorway. Sci. Total Environ, 235, 169-178.spa
dc.relation.referencesHarrigan, E. T. (February, 2012). Guidelines for Project Selection and Materials Sampling, Conditioning, and Testing In WMA. Research Studies. Research Results Digest 370. National Cooperative Highway Research Program, TRB.spa
dc.relation.referencesHassan, M. (2010). Evaluation of the environmental and economic impacts of warmmix asphalt using life-cycle assessment. Int. J. Constr. Educ. Res., 6(3), 238-250.spa
dc.relation.referencesHearon, A. y Diefenderfer, S. (2008). Laboratory evaluation of warm asphalt properties and performance. Airfield y Highway Pavements 2008, ASCE, 182-194.spa
dc.relation.referencesHensley, J. y Parmer, A. (1998). Establishing hot mix asphalt mixing and compaction temperatures at the project level. Asphalt, 12, 19-23.spa
dc.relation.referencesHill, B., Behnia, B., Buttlar, W. G. y Reis, H. (2013). Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement through mechanical performance tests and an acoustic emission approach. J. Mater. Civ. Eng., 25, 1887-1897.spa
dc.relation.referencesHossain, Z. y Zaman, M. (2013). Behavior of selected warm mix asphalt additive modified binders and prediction of dynamic modulus of the mixes. J. Test. Eval., 41(1), 1-12.spa
dc.relation.referencesHossain, Z., Lewis, S., Zaman, M., Buddhala, A. y O’Rear, E. (2013). Evaluation for warm-mix additive-modified asphalt binders using spectroscopy techniques. J. Mater. Civ. Eng., 25(2), 149-159.spa
dc.relation.referencesHossain, Z., Zaman, M., O’Rear, E. A. y Shen, D. H. (2012). Effectiveness of waterbearing and anti-stripping additives in warm mix asphalt technology. Int J Pave- ment Eng., 13(5), 424-432.spa
dc.relation.referencesHossain, Z., Zaman, M., Wasiuddin, N. M., Sneed, J. y O’Rear, E. A. (2011). Rheological evaluation of warm mix and anti-stripping additives modified perfor- mance grade binders. Road Materials and Pavement Design, 12, 875-895.spa
dc.relation.referencesHoward, I. L., Doyle, J. D. y Cox, B. C. (2013). Merits of reclaimed asphalt pavement-dominated warm mixed flexible pavement base layers. Road Materials and Pavement Design, 14(S2), 106-128.spa
dc.relation.referencesHoward, I. L., Doyle, J. D., Hemsley, J. M. Jr., Baumgardner, J. L. y Cooley, L. A. Jr. (2014). Emergency paving using hot-mixed asphalt incorporating warm mix technology. Int J Pavement Eng., 15(3), 202-214.spa
dc.relation.referencesHuang, B., Zhang, Y., Shu, X., Liu, Y., Penumadu, D. y Ye, X. P. (2013). Neutron scattering for moisture detection in foamed asphalt. J. Mater. Civ. Eng., 25(7), 932-938.spa
dc.relation.referencesHurley, G. y Prowell, B. (2006a). Evaluation of Aspha-Min for use in warm mix asphalt. Rep. n. 06-02. Auburn, AL: National Center for Asphalt Technology (NCAT).spa
dc.relation.referencesHurley, G. y Prowell, B. (2005). Evaluation of Aspha-Min® zeolite for use in warm mix asphalt. NCAT Report 05-04, Auburn, AL: National Center for Asphalt Technology.spa
dc.relation.referencesHurley, G. y Prowell, B. (2006c). Evaluation of Evotherm® for use in warm mix asphalt. NCAT Report 06-02, Auburn, AL: National Center for Asphalt Technology.spa
dc.relation.referencesHurley, G. y Prowell, B. (2006b). Evaluation of potential process for use in warm mix asphalt. J. Assoc. Asphalt Paving. Technol., 75, 41-90.spa
dc.relation.referencesHurley, G. y Prowell, B. (2006d). Evaluation of Sasobit® for use in warm mix asphalt. NCAT Report 05-06, Auburn, AL: National Center for Asphalt Technology.spa
dc.relation.referencesInstituto de Desarrollo Urbano (IDU). (2013). Inventario de malla. Recuperado de http://www.idu.gov.co/web/guest/malla_inventario.spa
dc.relation.referencesInstituto de Desarrollo Urbano (IDU). (2011). Especificaciones técnicas generales de materiales y construcción para proyectos de infraestructura vial y de espacio público para Bogotá D.C. Bogotá, Colombia.spa
dc.relation.referencesInstituto de Desarrollo Urbano y Universidad de Los Andes. (2002). Estudio de las mejoras mecánicas de mezclas asfálticas con desechos de llantas. Informe Final. Bogotá D. C.spa
dc.relation.referencesInstituto Nacional de Vías (Invías). (2013). Especificaciones Generales de Construcción de Carreteras. Bogotá, Colombia.spa
dc.relation.referencesInstituto Nacional de Vías (Invías). (2013a). Normas de Ensayos de Materiales. Bogotá, Colombia.spa
dc.relation.referencesJamshidi, A., Hamzah, M. O. y You, Z. (2013). Performance of warm mix asphalt containing Sasobit: state-of-the-art. Construction and Building. Materials, 38, 530-553.spa
dc.relation.referencesJamshidi, A., Hamzah, M. O. y Zahed, M. A. (2013a). Rheological evaluation and modeling of Sasobit®-modified asphalt binder at high temperatures. Pet. Sci. Technol., 31(5), 1574-1584.spa
dc.relation.referencesKanitpong, K., Charoentham, N. y Likitlersuang, S. (2012). Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with Sasobit. Int. J. Pavement Eng., 13(5), 451-458.spa
dc.relation.referencesKassem, E., Masad, E., Lytton, R. y Bulut, R. (2009). Measurements of the moisture diffusion coefficient of asphalt mixtures and its relationship to mixture composition. Int. J. Pavement Eng., 10(6), 389-399.spa
dc.relation.referencesKavussi, A. y Hashemian, L. (2011). Properties of WMA–foam mixes based on major mechanical tests. J. Civ. Eng. Manage., 17(2), 207-216.spa
dc.relation.referencesKavussi, A. y Hashemian, L. (2012). Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes. Int. J. Pavement Eng., 13(5), 415-423.spa
dc.relation.referencesKavussi, A., Qorbani, M., Khodaii, A. y Haghshenas, H. F. (2014). Moisture susceptibility of warm mix asphalt: a statistical analysis of the laboratory testing results. Construction and Building. Materials, 52, 511-517.spa
dc.relation.referencesKheradmand, B., Muniandy, R., Hua, L. T., Yunus, R. B. y Solouki, A. (2014). An overview of the emerging warm mix asphalt technology. Int. J. Pavement Eng., 15(1), 79-94.spa
dc.relation.referencesKhodaii, A., Tehrani, H. K. y Haghshenas, H. F. (2012). Hydrated lime effect on moisture susceptibility of warm mix asphalt. Construction and Building. Materials, 36, 165-170.spa
dc.relation.referencesKim, H., Lee, S. J., Amirkhanian, S. N. y Park, T. S. (2011). Performance evaluation of recycled PMA binders containing warm mix asphalt additives. J. Test. Eval., 39, 1-7.spa
dc.relation.referencesKim, S., Park, J., Lee, S. y Kim, K. W. (2014). Performance of modified WMA Mixtures prepared using the same class pg binders of HMA mixtures. J. Test. Eval., 42, 1-10.spa
dc.relation.referencesKim, Y., Zhang, J. y Ban, H. (2012). Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation. Construction and Building. Materials, 31, 204-211.spa
dc.relation.referencesKoenders, B.G., Stoker, D.A., Bowen, C., De Groot, P., Larsen, O., Hardy, D. y Wilms, K.P. (2000). Innovative Processes in Asphalt Production and Application to Obtain Lower Operating Temperatures. 2nd Eurasphalt y Eurobitume Congress, Barcelona, Spain.spa
dc.relation.referencesKringos, N., Scarpas, T., Kasbergen, C. y Selvadurai, P. (2008). Modeling of combined physical–mechanical moisture-induced damage in asphaltic mixes, part 1: governing processes and formulations. Int. J. Pavement Eng., 9(2), 115-128.spa
dc.relation.referencesKringos, N., Scarpas, T., Copeland, A. y Youtcheff, J. (2008a). Modeling of combined physical–mechanical moisture-induced damage in asphaltic mixes, part 2: moisture susceptibility parameters. Int J Pavement Eng., 9(2), 129-151.spa
dc.relation.referencesKristjansdottir, O., Muench, S., Michael, L. y Burke, G. (2007). Assessing potential for warm-mix asphalt technology adoption. Transp. Res. Rec., 2040, 91-99.spa
dc.relation.referencesKupiainen, K. (2007). Road Dust from Pavement Wear and Traction Sanding. Monographs of the Boreal Environment Research, n.° 26. Finnish Environment Institute, Helsinki, Finland.spa
dc.relation.referencesKutay, M. y Ozturk, H. (2012). Investigation of moisture dissipation in foam-based warm mix asphalt using synchrotron-based x-ray microtomography. J. Mater. Civ. Eng., 24(6), 674-683.spa
dc.relation.referencesKvasnak, A., Taylor, A., Signore, J. y Bukhari S. (2010). Preliminary evaluation of warm mix asphalt field demonstration: Franklin, Tennessee. NCAT Rep. 10-03, Auburn, AL: National Center for Asphalt Technology.spa
dc.relation.referencesKvasnak, A., West, R., Hurley, G., Prowell, B., Jones, D., Kreich, T., Osborn, L., Peregrine, K. y Frank, B. (2009). Engineering properties, emissions, and field performance of warm mix asphalt technology. Interim Report Volume I Literature Review for NCHRP Project 09-47A, Transportation Research Board, National Academies, Washington, DC.spa
dc.relation.referencesKvasnak, A., West, R., Moore, J., Nelson, J., Turner, P. y Tran, N. (2009a). Case study of warm mix asphalt moisture susceptibility in Birmingham. Proceedings of the 88th Transportation Research Board Annual Meeting, Washington, DC.spa
dc.relation.referencesLee, M. S., Kim, S. y Kim, K. W. (2012). Estimation of optimum compaction temperature for PMA and WMA mixtures by volumetric property evaluation. J. Test. Eval., 40, 463-475.spa
dc.relation.referencesLiao, M. y Chen, J. (2011). Zero Shear Viscosity of Bitumen-Filler Mastics. J. Mater. Civ. Eng., 23, 1672-1680.spa
dc.relation.referencesLin, X. X. (1989). A Method of Determining the Relevant Parameters in the Calculation of Pavement Deformation of Bituminous Surface. China J. Highway and Transport, n.° 2, 10–20.spa
dc.relation.referencesLin, X. X. (1989a). Study on Semi-Rigid Asphalt Pavement. Rep. of Key Sci. and Tech. Projects, 85–65. Beijing: Ministry of Communications.spa
dc.relation.referencesLiu, D. L., Yao, H. B. y Bao, S. Y. (2007). Performance of Nano-Calcium Carbonate and SBS Compound Modified Asphalt. J. Central South Univ. (Sci Technol), 38 (3), 579-582.spa
dc.relation.referencesLiu, S., Cao, W. y Fang, J. (2010). Orthogonal test research of asphalt rubber modified by warm asphalt additive. ICCTP 2010: Integrated Transportation Systems— 3481, Green Intelligent Reliable, ASCE, 3480-3492.spa
dc.relation.referencesLiu, J., Saboundjian, S., Li, P., Connor, B. y Brunette, B. (2011). Laboratory evaluation of Sasobit-modified warm-mix asphalt for Alaskan conditions. J. Mater. Civ. Eng., 23, 1498-1505.spa
dc.relation.referencesMallick, R. B., Tao, M., Chen, B., O’Sullivan, K. y Cacciatore, P. (2011). Practical method to understand the effect of aggregate drying on the moisture content of hot-mix asphalt. Transp. Res. Rec., 2208, 90-96.spa
dc.relation.referencesMcCarthy, L., Park, S. y Mensching, D. (2012). A proposed technology development of a warm mix asphalt technology evaluation program. NCHRP Project 20-07, Task 311, Transportation Research Board, National Academies, Washington, DC.spa
dc.relation.referencesMcDaniel, R., Shah, A., Huber, G. y Gallivan, V. (2007). Investigation of properties of plant-produced RAP mixtures. Transp. Res. Rec., 1998, 103-111.spa
dc.relation.referencesMedeiros, M. S. Jr, Daniel, J. S., Bolton, H. L. y Meagher, W. C. (2012). Evaluation of moisture and low-temperature cracking susceptibility of warm-mixture asphalt. Int. J. Pavement Eng., 13(5), 395-400.spa
dc.relation.referencesMehrara, A. y Khodaii, A. (2013). A review of state of the art on stripping phenomenon in asphalt concrete. Construction and Building. Materials, 38, 423-442.spa
dc.relation.referencesMerdrignac, I. y Espinat, D. (2007). Physicochemical Characterization of Petroleum Fractions: The State of The Art. Oil and Gas Science and Technology-Revue de l’IFP, 62(1), 7–32.spa
dc.relation.referencesMiddleton, B. y Forfylow, R. W. (2009). Evaluation of warm-mix asphalt produced with the double barrel green process. Transp. Res. Rec., 2126, 19-26.spa
dc.relation.referencesMinisterio de Ambiente, Vivienda y Desarrollo Territorial. (Octubre del 2010). ANDESCO Asociación Nacional de Empresarios de Servicios Públicos y Comunicaciones Recuperado de http://www.andesco.com/site/assets/media/camara/ambien- tal/Normativa/Resolucion % 201457 % 20de % 202010 % 20del % 20MAVDT% 20- % 20Postconsumo % 20llantas % 20usadas.pdf.spa
dc.relation.referencesMinisterio de Transporte. (2000). Parque automotor de transporte de carga en Colombia. Bogotá D. C.: Oficina de Planeación.spa
dc.relation.referencesMinisterio de Transporte. (2004). El Transporte en cifras. Bogotá D. C.: Oficina de Planeación.spa
dc.relation.referencesMinisterio de Transporte. (2006). Diagnóstico del Sector Transporte. Bogotá D. C.: Oficina de Planeación.spa
dc.relation.referencesMinisterio de Transporte. (2010). Diagnóstico del Transporte - Cifras correspondientes al año 2009 y anteriores. Bogotá: Oficina de Planeación.spa
dc.relation.referencesMinisterio de Transporte. (2010). Resolución 1384 de 2010, por el cual se adopta el método para establecer los límites de velocidad en las carreteras nacionales, departamentales, distritales y municipales de Colombia,spa
dc.relation.referencesMinisterio de Transporte - Instituto Nacional de Vías (Invías). (2008). Guía metodológica para el diseño de obras de rehabilitación de pavimentos asfálticos de carreteras. Bogotá.spa
dc.relation.referencesMinisterio de Transporte, Instituto Nacional de Vías (Invías) y Centro de Investigaciones en Materiales y Obras Civiles de la Universidad de Los Andes (Cimoc). (2003). Evaluación del efecto del incremento en los pesos brutos de los camiones C2 y C3 en la vida útil de las vías de la red vial nacional de Colombia. Bogotá D. C.spa
dc.relation.referencesMogawer, W., Austerman, A. y Bahia, H. (2011a). Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures. Transp. Res. Rec., 2209, 52-60.spa
dc.relation.referencesMogawer, W., Austerman, A., Mohammad, L. y Kutay, M. E. (2013). Evaluation of high RAP-WMA asphalt rubber mixtures. Road Material and Pavement Design, 14(S2), 129-147.spa
dc.relation.referencesMogawer, W., Austerman, A. y Roussel, M. (2011). Performance characteristics of asphalt rubber mixtures containing RAP and warm mix asphalt technology. Proceedings of the 2nd International Warm-Mix Conference, St. Louis, MO.spa
dc.relation.referencesMokhtari, A. y Nejad, F. M. (2013). Comparative study on performance of waxmodified and typical SMA mixtures. J. Mater. Civ. Eng., 25(3), 419-427.spa
dc.relation.referencesMorea, F., Marcozzi, R. y Castaño, G. (2012). Rheological properties of asphalt binders with chemical tensoactive additives used in warm mix asphalts (WMAs). Construction and Building. Materials, 29, 135-141.Morea, F., Marcozzi, R. y Castaño, G. (2012). Rheological properties of asphalt binders with chemical tensoactive additives used in warm mix asphalts (WMAs). Construction and Building. Materials, 29, 135-141.spa
dc.relation.referencesNational Highway Institute. (1997). Superpave for generalist engineer and project staff. Publication n.° FHWA HI 97-031. McLean, VA: Federal Highway Administration.spa
dc.relation.referencesNazzal, M. D., Sargand, S. y Al-Rawashdeh, A. (2011). Evaluation of warm mix asphalt mixtures containing RAP using accelerated loading tests. J. Test. Eval., 39, 1-8.spa
dc.relation.referencesNejad, F. M., Azarhoosh, A., Hamedi, G. H. y Roshani, H. (2014). Rutting performance prediction of warm mix asphalt containing reclaimed asphalt pavements. Road Materials and Pavement Design., 15(1), 207-219.spa
dc.relation.referencesNewcomb, D., Arambula, E., Epps, J. A., Little, D., Bhasin, A. y Li, W. (2012). Properties of foamed asphalts for warm mix asphalt applications. Interim Report, Part 1 - Literature Review for NCHRP Project 09-53, Transportation Research Board, National Academies, Washington, DC.spa
dc.relation.referencesOliveira, J., Silva, H., Abreu, L. y González, J. (2012). The role of a surfactant based additive on the production of recycled warm mix asphalts – less is more. Construction and Building. Materials, 35, 693-700.spa
dc.relation.referencesOscarsson, E. y Said, S. (2012). Assessment of ZSV in asphalt concrete using shear frequency sweep testing. J. Mater. Civ. Eng., 24(10), 1305-1309.spa
dc.relation.referencesOuni, A. E., Dony, A. y Colin, J. (2014). Probabilistic parametric approach for rutting evaluation: application to hot and warm asphalt. Int. J. Pavement Eng., 15(1), 58-65.spa
dc.relation.referencesProwell, B., Frank, B., Osborne, L., Kriech, T. y West, R. (2014). Effects of WMA on plant energy and emissions and worker exposures to respirable fumes. NCHRP 9-47A Defat Final Report, Vol. II, Washington, DC: Transportation Research Board.spa
dc.relation.referencesProwell, B. y Hurley, G. C. (2005). Evaluation of Sasobit for use in warm mix asphalt. NCAT Rep. 05–06, Auburn, AL: National Center for Asphalt Technology. Pspa
dc.relation.referencesProwell, B., Hurley, G. y Crews, E. (2007). Field performance of warm-mix asphalt at the NCAT test track. 86th Annual Meeting of the Transportation Research Board, Transportation Research Board, Washington, DC.spa
dc.relation.referencesPunith, V. S, Xiao, F. y Amirkhanian, S. N. (2011). Effects of moist aggregates on the performance of warm mix asphalt mixtures containing non-foaming additives. J. Test. Eval., 39, 1-11.spa
dc.relation.referencesQin, Q., Farrar, M. J., Pauli, A. T. y Adams, J. J. (2014). Morphology, thermal analysis and rheology of Sasobit modified warm mix asphalt binders. Fuel, 115, 416-425.spa
dc.relation.referencesRan, J., Xu, S., Li, M. y Ji, J. (2010). Research on the performances of warm asphalt and warm mix asphalt with Sasobit. ICCTP 2010: Integrated Transportation Systems, Green Intelligent Reliable 2010, ASCE, 3725-3737.spa
dc.relation.referencesRobjent, L. y Dosh W. (2009). Warm-mix asphalt for rural county roads. Cold Regions Engineering 2009, ASCE, 438-454.spa
dc.relation.referencesRodríguez-Alloza, A. M., Gallego, J. y Pérez, I. (2013). Study of the effect of four warm mix asphalt additives on bitumen modified with 15 % crumb rubber. Construction and Building. Materials, 43, 300-308.spa
dc.relation.referencesRomier, A., Audeon, M., David, J., Martineau, Y. y Olard, F. (2006). Low-energy asphalt with performance of hot-mix asphalt. Transp. Res. Rec., 1962, 101-112.spa
dc.relation.referencesRomier, A., Audeon, M., Jac, D. y Martineau, Y. (2004). Low-energy asphalt (LEA) with the performance of hot mix asphalt. Eur. Roads Rev., 2, 20-29.spa
dc.relation.referencesRondón, H. A. y Reyes, F. A. (2011). Pavimentos flexibles [Flexible pavements]. Madrid: Editorial Académica Española.spa
dc.relation.referencesRondón, H. A., Reyes, F. A., Vásquez, S. Y. y González, L. (2012). Ahuellamiento y fatiga en mezclas asfálticas [Rutting and fatigue in asphalt mixtures.]. Bogotá: Ed. Universidad Distrital Francisco José de Caldas.spa
dc.relation.referencesRondón, H. A. y Reyes, F. A. (2015). Pavimentos – Materiales, Construcción y Diseño [Pavements – Materials, Construction and Design.]. Bogotá: Ed. ECOE Ediciones.spa
dc.relation.referencesRossi, D., Filippi, S., Merusi, F., Giuliani, F. y Polacco, G. (2013). Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts. J. Appl. Polym. Sci., 129, 341-354.spa
dc.relation.referencesRubio, M., Martínez, G., Baena, L. y Moreno, F. (2012). Warm mix asphalt: an overview. J. Clean. Prod., 24, 76-84.spa
dc.relation.referencesRubio, M., Moreno, F., Martínez, M., Martínez, G. y Vásquez, J. (2013). Comparative analysis of emissions from the manufacture and use of hot and half-warm mix asphalt. J. Clean. Prod., 41, 1-6.spa
dc.relation.referencesSabogal, F. (2001). Gestión de la conservación vial en Colombia. En: XIV Congreso Mundial de la Carretera, International Road Federation – IRF, París (Francia).spa
dc.relation.referencesSafaei, F., Lee, J. S., Do Nascimento, L. A., Hintz, C. y Kim, Y. R. (2014). Implications of warm-mix asphalt on long-term oxidative ageing and fatigue performance of asphalt binders and mixtures. Road Materials and Pavement Design, 15, 45-61.spa
dc.relation.referencesSánchez, E., Vega, A. y Castro, D. (2012). Effect of type of compaction on mechanical properties in warm-mix asphalts. J. Mater. Civ. Eng., 24(8), 1043-1049.spa
dc.relation.referencesSánchez, E., Vega, A., Castro, D. y Del Rio, M. (2011). Evaluation of compactability and mechanical properties of bituminous mixes with warm additives. Construction and Building. Materials, 25, 2304-2311.spa
dc.relation.referencesSangsefidi, E., Ziari, H. y Mansourkhaki, A. (2014). The effect of aggregate gradation on creep and moisture susceptibility performance of warm mix asphalt. Int J Pavement Eng., 15(2), 133-141.spa
dc.relation.referencesSargand, S., Nazzal, M., Al-Rawashdeh, A. y Powers, D. (2012). Field evaluation of warm-mix asphalt technologies. J. Mater. Civ. Eng., 24(11), 1343-1349.spa
dc.relation.referencesSengöz, B., Topal, A. y Gorkem, C. (2013). Evaluation of moisture characteristics of warm mix asphalt involving natural zeolite. Road Materials and Pavement Design, 14(4), 933-945.spa
dc.relation.referencesShell International Petroleum Company. (1978). Shell Pavement Design Manual. Asphalt Pavement and Overlays for Road Traffic. Londres.spa
dc.relation.referencesShen, S., Wen, H., Zhang, W., Wu, S., Mohammad, L., Lund, N. y Faheem, A. (2011). Performance of WMA technologies: Stage 2 – long-term field performance, Phase I. Interim Report Excerpted Literature Review for NCHRP Project 09-49A, Transportation Research Board, National Academies, Washington, DC.spa
dc.relation.referencesShivaprasad, P. V., Xiao, F. y Amirkhanian, S. N. (2012). Evaluation of moisture sensitivity of stone matrix asphalt mixtures using polymerised warm mix asphalt technologies. Int. J. Pavement Eng., 13(2), 152-165.spa
dc.relation.referencesShivaprasad, P. V., Xiao, F. y Amirkhanian, S. N. (2011). Moisture susceptibility of polymerized stone matrix asphalt mixtures using warm mix asphalt technologies using moist aggregates. J. ASTM Int., 8, 1-14.spa
dc.relation.referencesShivaprasad, P. V., Xiao, F. y Amirkhanian, S. N. (2011a). Moisture and rutting resistances of foamed asphalt mixtures containing recycled coal ash or shingles with moist aggregates. J. ASTM Int., 9(2), 1-11.spa
dc.relation.referencesSilva, H., Oliveira, J., Ferreira, C. y Pereira, P. (2010b). Assessment of the performance of warm mix asphalts in road pavements. Int. J. Pavement Res. Technol., 3(3), 119-127.spa
dc.relation.referencesSilva, H. M., Oliveira, R. M., Peralta, J. y Zoorob, S. E. (2010a). Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents. Construction and Building. Materials, 24(9), 1621-1631.spa
dc.relation.referencesSterling, V. (2012). Special mixture design considerations and methods for warm mix asphalt: a supplement to NCHRP Report 673: a manual for design of hot mix asphalt with commentary. National Cooperative Highway Research Program - NCHRP Report 714. Washington, DC: Transportation Research Board.spa
dc.relation.referencesStroup-Gardiner, M. y Lange, C. (August, 2002). Characterization of Asphalt Odors and Emissions. Proceedings, 9th International Conference on Asphalt Pavements, Copenhagen, Denmark, 2002.spa
dc.relation.referencesSu, K., Maekawa, R. y Hachiya, Y. (2009). Laboratory evaluation of WMA mixture for use in airport pavement rehabilitation. Construction and Building. Materials, 23, 2709-2714.spa
dc.relation.referencesTan, Y., Guo, M., Xu, H. y Zhang, R. (2012). Comparative study on laboratory performance of hot- and warm-mix asphalt mixtures. J. Test. Eval., 40(5), 1-9.spa
dc.relation.referencesTang, Y. y Haddock, J. E. (2006). Field Testing of the Zero-Shear Viscosity Method. Transportation Research: Factors Affecting Compaction of Asphalt Pavements, n.° E-C105, September, 18-26.spa
dc.relation.referencesTao, Z., Huang, W., Du, Q. y Yan, J. (2009a). Warm mix asphalt technology applied at low air temperature in China. Road Materials and Pavement Design, 10(S1), 337-347.spa
dc.relation.referencesTao, Z., Ni, F., Yan, J. y Huang, W. (2009b). Evotherm warm mix asphalt technology applied on ultra-thin pavement in China. GeoHunan International Conference 2009, ASCE, 171-6.spa
dc.relation.referencesTarefder, R. A., Zaman, M. y Hobson, K. (2003). A laboratory and statistical evaluation of factors affecting rutting. Int. J. Pavement Eng., 4(1), 59-68.spa
dc.relation.referencesTopal, A., Sengoz, B., Kok, B. V., Yilmaz, M., Dokandari, P. A., Oner, J. y Kaya, D. (2014). Evaluation of mixture characteristics of warm mix asphalt involving natural and synthetic zeolite additives. Construction and Building. Materials, 57, 38-44.spa
dc.relation.referencesUllidtz, P. (1987). Pavement Analysis. Development in Civil Engineering. 19a ed. Elsevier, 318 pp.spa
dc.relation.referencesUllidtz, P. y Peattie, K. R. (1980). Pavement Analysis by Programmable Calculator. Journal of Transportation Engineering, 106(5), 581-597.spa
dc.relation.referencesUnited Nations Economic Commissions for Europe (UNECE). (2013). Globally Harmonized System of Classification and Labelling of Chemicals – GHS (Fifth ed.). Europe: ONU.spa
dc.relation.referencesVaitkus, A., Čygas, D., Laurinavičius, A. y Perveneckas, Z. (2009). Analysis and evaluation of possibilities for the use of warm mix asphalt in Lithuania. Baltic J. Road Bridge Eng., 4(2), 80-86.spa
dc.relation.referencesVan De Ven, M., Jenkins, K., Voskuilen, J. y Van Den Beemt, R. (2007). Development of (half) warm foamed bitumen mixes: state of the art. Int J Pavement Eng., 8(2), 163-175.spa
dc.relation.referencesVasconcelos, K., Bhasin, A. y Little, D. (2010). Influence of reduced production temperatures on the adhesive properties of aggregates and laboratory performance of fine aggregate-asphalt mixtures. Road Materials and Pavement Design, 11(1), 47-64.spa
dc.relation.referencesVidal, R., Moliner, E., Martínez, G. y Rubio, M. C. (2013). Life cycle assessment of hot mix asphalt and zeolite-based warm mix asphalt with reclaimed asphalt pavement. Resour. Conserv. Recycl., 74, 101-114.spa
dc.relation.referencesWang, C., Hao, P., Ruan, F., Zhang, X. y Adhikari, S. (2013). Determination of the production temperature of warm mix asphalt by workability test. Construction and Building. Materials, 48, 1165-1170.spa
dc.relation.referencesWang, Q. (2011). The application of warm crumb rubber modified asphalt mixture. J. Highway Transp. Res. Dev., 3, 93-94.spa
dc.relation.referencesWasiuddin, N., Selvamohan, S., Zaman, M. y Guegan, M. (2007). Comparative laboratory study of Sasobit and Aspha-Min additives in warm-mix asphalt. Transp. Res. Rec., 1998, 82-88.spa
dc.relation.referencesWasiuddin, N., Saltibus, N. y Mohammad, L. (2011). Effects of a wax-based warm mix additive on cohesive strengths of asphalt binders. Transportation and Development Institute Congress, ASCE, 528-537.spa
dc.relation.referencesWest, R. (June, 2009). Field testing of warm mix asphalt. Presentation at the Warm Mix Asphalt y Recycling Symposium, Sacramento, CA.spa
dc.relation.referencesWest, R., Rodezno, C., Julian, G. y Prowell, D. (2014). Engineering properties and field performance of warm mix asphalt technologies. NCHRP Final Report Project n.° 09-47A, Washington, DC: Transportation Research Board.spa
dc.relation.referencesWest, R. C., Watson, D. E., Turner, P. A. y Casola, J. R. (2010). Mixing and compaction temperatures of asphalt binders in hot-mix asphalt. NCHRP Report 648, Washington, DC: Transportation Research Board.spa
dc.relation.referencesWielinski, J., Hand, A. y Rausch, D. (2009). Laboratory and field evaluations of foamed warm-mix asphalt projects. Transp. Res. Rec., 2126, 125-131.spa
dc.relation.referencesWPCF. (1986). Meeting the challenge of nonpoint source control. Journal of Water Pollution Control Federation, 58(7), 730-740.spa
dc.relation.referencesWu, C. y Zeng, M. (2012). Effects of additives for warm mix asphalt on performance grades of asphalt binders. J. Test. Eval., 40, 265-272.spa
dc.relation.referencesXiao, F., Punith, V. S. y Amirkhanian, S. N. (2012a). Effects of non-foaming WMA additives on asphalt binders at high performance temperatures. Fuel, 94, 144-155.spa
dc.relation.referencesXiao, F., Punith, V. S., Amirkhanian, S. N. y Thodesen, C. (2013). Improved resistance of long-term aged warm-mix asphalt to moisture damage containing moist aggregates. J. Mater. Civ. Eng., 25(7), 913-922.spa
dc.relation.referencesXiao, F., Punith, V. S. y Putman, B. (2013a). Effect of compaction temperature on rutting and moisture resistance of foamed warm-mix-asphalt mixtures. J. Mater. Civ. Eng., 25(9), 1344-1352.spa
dc.relation.referencesXiao, F., Punith, V. S., Putman, B. y Amirkhanian, S. N. (2011). Utilization of foaming technology in warm-mix-asphalt mixtures containing moist aggregates. J. Mater. Civ. Eng., 23(9), 1328-1337.spa
dc.relation.referencesXiao, F., Zhao, W., Gandhi, T. y Amirkhanian, S. N. (2010). Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures. Journal Materials Civil Engineering, 22(10), 1047-1055.spa
dc.relation.referencesXiao, F., Zhao, W., Gandhi, T. y Amirkhanian, S. N. (2012). Laboratory investigation of moisture susceptibility of long-term saturated warm mix asphalt mixtures. Int J Pavement Eng., 13(5), 401-414.spa
dc.relation.referencesYanhai, Y., Huaizhi, Z. y Yaodong, W. (2009). Laboratory Evaluation of the Warm Mix Asphalt Performance in Liaoning. ICCTP 2009: Critical Issues in Transportation Systems Planning, Development, and Management 2009, ASCE, 433-439.spa
dc.relation.referencesYan, J., Cao, Y., Zhu, T., Cai, M., Cao, Z., Huang, W. y Dong, Q. (2010). Shanghai experience with warm mix asphalt. GeoShanghai 2010 International Conference, ASCE, 97-102.spa
dc.relation.referencesYildirim, Y. (2007). Polymer modified asphalt binders. Construction and Building Materials, 21(1), 66-72.spa
dc.relation.referencesYou, Z.; Mills-Beale, J.; Foley, J. M.; Roy, S.; Odegard, G. M.; Dai, Q. y Goh, S. W. (2011). Nanoclay-Modified Asphalt Materials: Preparation and Characterization. Construction and Building Materials, 25, 1072-1078.spa
dc.relation.referencesYou, Z. y Goh, S. W. (2008). Laboratory evaluation of warm mix asphalt: a preliminary study. Int. J. Pavement Res. Technol., 1(1), 34-40.spa
dc.relation.referencesYu, X., Leng, Z. y Wei, T. (2014). Investigation of the rheological modification mechanism of warm-mix additives on crumb-rubber-modified asphalt. J Mater Civ Eng., 26(2), 312-319.spa
dc.relation.referencesYu, X., Wang, Y. y Luo, Y. (2013). Effects of types and content of warm-mix additives on CRMA. J. Mater. Civ. Eng., 25(7), 939-945.spa
dc.relation.referencesYu, X., Wang, Y. y Luo, Y. (2013a). Impacts of water content on rheological properties and performance-related behaviors of foamed warm-mix asphalt. Construction and Building. Materials, 48, 203-209spa
dc.relation.referencesZelelew, H., Paugh, C., Corrigan, M., Belagutti, S. y Ramakrishnareddy, J. (2013). Laboratory evaluation of the mechanical properties of plant-produced warmmix asphalt mixtures. Road Materials and Pavement Desesign, 14(1), 49-70.spa
dc.relation.referencesZhang, M. F. y Fu, Z. (2007). Performance and modification mechanism of nano CaCO3 modified asphalt. J. Wuh Univ. Technol. (Transport Sci Eng), 31(1), 88-91.spa
dc.relation.referencesZhao, S., Huang, B., Shu, X. y Woods, M. (2013). Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement. Construction and Building. Materials, 44, 92-100.spa
dc.relation.referencesZhao, W., Xiao, F., Amirkhanian, S. N. y Putman, B. J. (2012). Characterization of rutting performance of warm additive modified asphalt mixtures. Construction and Building. Materials, 31, 265-272.spa
dc.relation.referencesZoorob, S. E., Castro, J. P. y Pereira, L. A. (2012). Assessing low shear viscosity as the new bitumen softening point test. Construction and Building. Materials, 27, 357-367.spa
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.accesoAbierto (Texto Completo)spa
dc.rights.accessrightsOpenAccessspa
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectMezcla asfáltica tibiaspa
dc.subjectCriterios técnicos y medioambientalesspa
dc.subjectAditivo HUSILspa
dc.subjectPropiedades reológicasspa
dc.subject.keywordWarm asphalt mixspa
dc.subject.keywordTechnical and environmental criteriaspa
dc.subject.keywordHUSIL additivespa
dc.subject.keywordRheological propertiesspa
dc.subject.lembIngeniería de carreterasspa
dc.subject.lembMateriales de construcción ecológicosspa
dc.subject.lembTecnología del asfaltospa
dc.subject.lembDiseño de mezclas asfálticasspa
dc.titleDesarrollo de una mezcla asfáltica tibia bajo criterios técnicos y medioambientalesspa
dc.title.titleenglishDevelopment of a warm asphalt mix under technical and environmental criteriaspa
dc.typebookspa

Archivos

Bloque original

Mostrando 1 - 1 de 1
Cargando...
Miniatura
Nombre:
Libro Desarrollo_Final 02-04-2018.pdf
Tamaño:
14.65 MB
Formato:
Adobe Portable Document Format
Descripción:
Desarrollo de una mezcla asfáltica tibia

Bloque de licencias

Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
7 KB
Formato:
Item-specific license agreed upon to submission
Descripción: