Comportamiento paramétrico entre la temperatura de transacción vítrea y el tamaño de grano de neumáticos fuera de uso (NFU) mediante un análisis granulométrico

Fecha

Autor corporativo

Título de la revista

ISSN de la revista

Título del volumen

Editor

Compartir

Altmetric

Resumen

The study of the glass transition temperature (Tg) in polymers results an interesting field due to its importance in the milling industry cryogenic. However, to find this value it is necessary to use techniques that in the market and the academy are not accessible. The foregoing encourages researchers to find new study techniques that allow the industry and especially to academia to understand the behavior of polymers in glass transition states. In the following investigative work, it is intended to provide a new technique to detect the Tg range in end-of-life tires (NFU), since in this state the material is at its most brittle and is sprayed with the least amount applied energy. For this, the parametric behavior between the glass transition temperature and grain size NFU by analysis granulometry. In order to meet this objective, a montage is developed that allow the tire samples to be impacted at equal load conditions and, Subsequently, a granulometry test is carried out in order to trace the characteristic curve of the material at different temperature ranges. By plotting the behavior of the granulometric curve between the ranges of - 40 to -50 ° C, -51 to -60 ° C and -61 to -70 ° C it is observed how the percentage of particulate fine increases exponentially at low temperatures and how in parallel the Larger granules decrease as expected. This job offers the development of a new method of correlation between the behavior of polymeric materials and particle size analysis.

Descripción

El estudio de la temperatura de transición vítrea (Tg) en los polímeros resulta un campo interesante debido a su importancia en la industria de la molienda criogénica. No obstante, para hallar este valor es necesario utilizar técnicas que en el mercado y en la academia no son accesibles. Lo anterior impulsa a los investigadores a encontrar nuevas técnicas de estudio que permita a la industria y especialmente a la academia a comprender el comportamiento de los polímeros en estados de transición vítrea. En el siguiente trabajo investigativo, se pretende aportar una nueva técnica para detectar el rango del Tg en neumáticos fuera de uso (NFU), dado que en este estado el material está en su punto más frágil y se pulveriza con la menor cantidad de energía aplicada. Para ello se analizará el comportamiento paramétrico entre la temperatura de transición vítrea y el tamaño de grano los NFU mediante un análisis de granulometría. A fin de cumplir dicho objetivo, se desarrolla un montaje que permita impactar las muestras de neumático a condiciones de cargas igual y, posteriormente, se realiza un ensayo de granulometría con el objetivo de trazar la curva característica del material a diferentes rangos de temperatura. Al trazar el comportamiento de la curva granulométrica entre los rangos de -40 a -50°C, -51 a -60°C y -61 a -70°C se observa cómo el porcentaje de particulado fino aumenta exponencialmente a temperaturas bajas y cómo paralelamente el granulado de mayor tamaño disminuye tal como se esperaba. Este trabajo ofrece el desarrollo de un nuevo método de correlación entre el comportamiento de los materiales poliméricos y el análisis granulométrico.

Palabras clave

Granulometria, Vitrea, Reciclaje, Molienda, Malla, Neumaticos

Materias

Ingeniería Mecánica - Tesis y disertaciones académicas , Temperatura de transición vitrea , Grano de neumáticos , Granulometría

Citación