Automatización de un sistema de tea bajo simulación con AspenHysys y Rslogix 5000

Fecha

Autor corporativo

Título de la revista

ISSN de la revista

Título del volumen

Editor

Compartir

Altmetric

Resumen

Along this document, automation is shown, under simulation that recreates the chemical processes and automation that is implemented in a flare system (real process of the sector Oil & Gas), documenting the process simulation, automation and procedures shown design achieving a useful knowledge base for future engineers to develop academic activities in this area. At first the system definition is made, shown generally each of its subsystems and then in a P&ID in some detail, the subsystems are described, as are the tea, the separator tank (KO drum), the hydraulic seal and auxiliary systems. Three real examples are also shown, that represent the validity and importance of this type of system. Subsequently, the methodology for automation is presented, simulation under a flare system, supported with ASPEN HYSYS simulation software ®, and ROCKWELL AUTOMATION ®. On the one hand, there is the software responsible for simulating the process of burning hydrocarbons; on the other hand, the software is responsible for automating the simulated process. To achieve integration between ASPEN HYSYS ® and ROCKWELL AUTOMATION ®, handshaking dynamic data (DDE acronym) is used, by means of macros that support communication between ASPEN HYSYS ® and ROCKWELL AUTOMATION, which in once let you know in real time the status of the variables involved in the process. In order to display this data in a visible way, through an HMI, and the status of the related instrumentation is used to Proficy HMI / SCADA software - iFIX ®.

Descripción

A lo largo de este documento, se muestra la automatización, bajo simulación, que recrea los procesos químicos y la automatización que se implementa en un sistema de TEAS (proceso real del sector Oil & Gas), documentando el proceso de simulación, automatización y procedimientos de diseño logrando una base de conocimiento útil para futuros ingenieros que desarrollen actividades académicas en esta área. Al principio se hace la definición del sistema, se muestra en general cada uno de sus subsistemas y luego, en un P&ID con cierto detalle, se describen los subsistemas, como son: la tea, el tanque separador (KO drum), el sello hidráulico y lo sistemas auxiliares. También, se muestran tres ejemplos reales, que representan la vigencia e importancia de este tipo de sistema. Posteriormente, se presenta la metodología para la automatización, bajo simulación de un sistema de tea, apoyados con los softwares de simulación ASPEN HYSYS ®, y ROCKWELL AUTOMATION ®. Por un lado, está el software encargado de simular el proceso de quema de hidrocarburos; por otro lado, está el software encargado de automatizar el proceso simulado. Para lograr la integración entre ASPEN HYSYS ® y ROCKWELL AUTOMATION ®, se utiliza el protocolo de intercambio de dinámico de datos (DDE, sigla en inglés), por medio de macros que soportan la comunicación entre ASPEN HYSYS ® y ROCKWELL AUTOMATION, que a su vez permitirá conocer en tiempo real el estado de las variables involucradas en el proceso. Con el fin mostrar estos datos de una manera visible, por medio de un HMI, y conocer el estado de la instrumentación relacionada, se recurre al software Proficy HMI/SCADA – iFIX ®.

Palabras clave

Sistema de tea, Aspen Hysys, Rslogix 5000, integración, comunicación, automatización

Citación