Influencia del Tiempo de Permanencia en el Tamaño de Grano de la Martensita en un Acero Tratado a Temperaturas Intercríticas

Fecha

Autor corporativo

Título de la revista

ISSN de la revista

Título del volumen

Editor

Compartir

Altmetric

Resumen

This project entitled "INFLUENCE OF THE TIME OF PERMANENCE IN THE GRAIN SIZE OF THE MARTENSITE IN A STEEL TREATED AT INTERCRITICAL TEMPERATURES" was carried out in the Universidad Distrital Francisco José de Caldas together with another project entitled "MATHEMATICAL MODELING OF THE GROWTH OF THE AUSTENIC GRAIN AND VERIFICATION EXPERIMENTAL OF ITS INFLUENCE ON THE HARDNESS OF A 1020 STEEL ". Since these projects go hand in hand, this only talks about the metallographic part of a steel SAE 1020. Where we want to determine the influence of time and treatment temperatures on the grain size at intercritical temperatures A1 and A3 to Through a tempering heat treatment, a sanding process, polishing and a study of the micrographs taken on 11 test pieces, this project was developed in an approximate time of 4 and a half months, period between February and June corresponding to the year 2018. Throughout the document all the information obtained is collected as data and results through the different processes made to steel SAE 1020 where it could be verified through the measurement of the grain in the micrographs obtained, which does increase the size of the grain, and the variable that most influences this variation is time.

Descripción

Este proyecto titulado “INFLUENCIA DEL TIEMPO DE PERMANENCIA EN EL TAMAÑO DE GRANO DE LA MARTENSITA EN UN ACERO TRATADO A TEMPERATURAS INTERCRITICAS” se realizó en la universidad Distrital Francisco José de Caldas junto con otro proyecto titulado “ MODELAMIENTO MATEMÁTICO DEL CRECIMIENTO DEL GRANO AUSTENITICO Y VERIFICACIÓN EXPERIMENTAL DE SU INFLUENCIA EN LA DUREZA DE UN ACERO 1020”. Ya que estos proyectos van de la mano, en este solo se habla de la parte metalográfica de un acero SAE 1020. Donde se quiere determinar la influencia del tiempo y de las temperaturas de tratamiento en el tamaño de grano a temperaturas intercríticas A1 y A3 a través de un tratamiento térmico de temple, un proceso de lijado, pulido y un estudio de las micrografías tomadas a 11 probetas, este proyecto se desarrolló en un tiempo aproximado de 4 meses y medio, periodo comprendido entre febrero y junio correspondiente al año 2018. A lo largo de todo el documente se recopila toda la información obtenida como datos y resultados a través de los diferentes procesos hechos al acero SAE 1020 donde se pudo comprobar a través de la medición del grano en las micrografías obtenidas, que sí aumenta el tamaño de grano, y la variable que más influye en esta variación es el tiempo.

Palabras clave

Martensita, Temperaturas intercríticas, Ferrita, Temple

Materias

TECNOLOGÍA MECÁNICA - TESIS Y DISERTACIONES ACADÉMICAS , ACERO - PRUEBAS , TRATAMIENTO TÉRMICO DEL ACERO , TEMPLADO DEL ACERO

Citación