ESTABLECER EL MÓDULO DE ELASTICIDAD DEL POLÍMERO NATURAL MOPA-MOPA(elaeagia pastoensis mora) VARIANDO EL METODO DE OBTENCION DE ACUERDO CON LAS NORMAS ISO 527-1 E ISO 527-2

Fecha

Autor corporativo

Título de la revista

ISSN de la revista

Título del volumen

Editor

Compartir

Altmetric

Resumen

The objective of this project is to determine the modulus of elasticity of the natural polymer Mopa-Mopa (Elaeagia pastoensis Mora) using various solvent extraction methods such as water, ethanol, and methanol, in order to determine the optimal modulus of elasticity through tensile testing. The acquisition of each experimental sample will allow for correlating mechanical properties such as ultimate stress and modulus of elasticity with the extraction methods employed. A total of 15 specimens will be manufactured using the base material, following the geometric and shape specifications outlined in ISO 527-1 and ISO 527-2 standards, thus establishing the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. The analysis of variance for the modulus of elasticity and deformation will be performed using the data obtained from each experiment separately, establishing the value of the modulus of elasticity determined through the tensile tests. By investigating the modulus of elasticity of the Mopa-Mopa natural polymer using different solvent extraction methods, this project contributes to understanding its mechanical behavior and determining the optimal modulus of elasticity. The results obtained from the tensile tests provide valuable insights for industries and researchers interested in utilizing this material in various fields, including engineering and material science.

Descripción

El objetivo de este proyecto es determinar el módulo de elasticidad del polímero natural Mopa - Mopa (Elaeagia pastoensis Mora) a partir de diversos métodos de obtención por solubilidad en disolventes como: agua, etanol y metanol, para determinar el mejor módulo de elasticidad, por el método de ensayo de tensión. La obtención de cada muestra experimental, permitirá correlacionar las propiedades mecánicas como: el esfuerzo último y módulo de elasticidad, en función de los métodos de obtención. Se fabricarán 15 probetas en el material base, bajo las especificaciones geométricas y de forma consignadas en las normas ISO 527-1 y ISO 527-2, así, se establecen los principios generales para la determinación de las propiedades en tensión de los plásticos y materiales compuestos de plástico en condiciones definidas .Se realizará el análisis de varianza del módulo de elasticidad y deformación, de los datos obtenidos en cada experimento por separado, estableciendo cuál es el valor módulo de elasticidad, determinados mediante los ensayos de tensión.

Palabras clave

Polimero natural, Barniz de Pasto, Módulo de elasticidad, ISO 527-1, ISO 527-2

Materias

Resistencia de materiales , Nuevos materiales

Citación