Evaluación de las Propiedades Reológicas y Térmicas de un Asfalto Convencional y Uno Modificado con un Desecho de PEBD
Fecha
Autor corporativo
Título de la revista
ISSN de la revista
Título del volumen
Editor
Universidad Distrital Francisco José de Caldas
Compartir
Director
Altmetric
Resumen
Descripción
Contexto: La tecnología de los asfaltos y las mezclas asfálticas modificadas ha sido una técnica ampliamente estudiada y utilizada en el mundo. Con la adición de polímeros al asfalto se modifican las propiedades mecánicas, químicas y reológicas de las mezclas asfálticas para intentar mejorar su comportamiento cuando son sometidas a diferentes condiciones de carga y del medio ambiente. Se reporta el resultado de un estudio de caracterización reológica y térmica ejecutado sobre un cemento asfáltico CA 60-70 convencional y uno modificado con un desecho de polietileno de baja densidad (PEBD).Método: La modificación del asfalto se realizó por vía húmeda en una proporción de PEBD/CA=5% con respecto a la masa. Para tal fin, ensayos de reología usando un reómetro dinámico de corte (DSR), y técnicas de Termogravimetría (TGA) y Calorimetría Diferencial de Barrido (DSC) fueron ejecutados sobre ambos asfaltos.Resultados y Conclusiones: El asfalto modificado con PEBD desarrolla un incremento notable en la rigidez y mejoramiento del grado de funcionamiento del asfalto a altas temperaturas. Adicionalmente, el asfalto modificado es más resistente a la oxidación y al envejecimiento por aumento de temperatura. Sin embargo, experimenta disminución de la resistencia al agrietamiento, bajo temperaturas bajas e intermedias de servicio.
Context: The asphalt technology and modified asphalt mixtures has been widely used and studied, worldwide. Adding polymers to asphalt modifies mechanical, chemical and rheological properties, trying to improve behavior of the mixtures subjected to different environmental and load conditions. The paper report results from rheological and thermal characterization on conventional 60-70 asphalt cement and 60-70 asphalt cement modified by introducing a waste of low density polyethylene (LDPE).Method: Modification of the asphalt was performed by wet way in a proportion of LDPE/CA=5% with respect to the mass. Rheological (using DSR), Thermogravimetry (TGA) and Differential Scanning Calorimetry (DSC) techniques were performed.Results and Conclusions: The modified asphalt develops a remarkable increase in stiffness and improvement of the performance grade at high temperatures of service. Additionally, the modified asphalt is more resistant to oxidation and aging processes due to heat. However, the asphalt modified showed a decrease in crack resistance at low and intermediate temperatures of service.
Context: The asphalt technology and modified asphalt mixtures has been widely used and studied, worldwide. Adding polymers to asphalt modifies mechanical, chemical and rheological properties, trying to improve behavior of the mixtures subjected to different environmental and load conditions. The paper report results from rheological and thermal characterization on conventional 60-70 asphalt cement and 60-70 asphalt cement modified by introducing a waste of low density polyethylene (LDPE).Method: Modification of the asphalt was performed by wet way in a proportion of LDPE/CA=5% with respect to the mass. Rheological (using DSR), Thermogravimetry (TGA) and Differential Scanning Calorimetry (DSC) techniques were performed.Results and Conclusions: The modified asphalt develops a remarkable increase in stiffness and improvement of the performance grade at high temperatures of service. Additionally, the modified asphalt is more resistant to oxidation and aging processes due to heat. However, the asphalt modified showed a decrease in crack resistance at low and intermediate temperatures of service.
Palabras clave
Differential Scanning Calorimetry, LDPE, modified asphalt, rheology, temperature, Thermogravimetry, reología, temperatura, cemento asfáltico modificado, PEBD, termogravimetría, calorimetría diferencial de barrido