Bohórquez Ávila, Carlos ArturoDomínguez Alonso, Daniel DavidGómez Moreno, Alejandro2017-07-172017-07-172017-06-07http://hdl.handle.net/11349/5995En el presente trabajo se establece una investigación en la cual se muestra la caracterización microestructural de un acero ASTM A-572 Grado 50, previamente sometido a tratamientos térmicos de revenido de 5 y 10 minutos a temperatura de inicio de transformación martensitica de 400 °C, y de temple a temperaturas intercríticas de análisis de 750°, 770°, 790° y 810 °C con enfriamiento súbito en agua a un tiempo determinado de 30 minutos. Realizados los tratamientos térmicos se procedió a analizar metalograficamente el material y por medio de ensayos de dureza y microdureza se determinó los constituyentes presentes en el material, concluyendo que estos influenciaron en la transformación de la microestructura ferrítica-perlítica (material base) a una microestructura con una matriz ferrítica-martensitica, evidenciando mejoras en la dureza del acero ASTM A-572 GR 50.In the present work there is established an investigation in which there shows itself the microstructural characterization of a steel ASTM A-572 Grade 50, previously submitted to thermal treatments of recome of 5 and 10 minutes to temperature of beginning of transformation Martensitic of 400 °C, and from tempering to intercritical temperatures of analysis of 750 °, 770 °, 790 ° and 810 °C with sudden cooling in water to a certain time of 30 minutes. Realized the thermal treatments one proceeded to analyze metallographic the material and by means of essays of hardness and microhardness one determined the present constituents in the material, concluding that they influenced these in the transformation of the microstructure ferritic-perlític (basic material) to a microstructure with acounterfoil ferritic-martensitic, demonstrating progress in the hardness of the steel ASTM A-572 Grade 50.pdfspaAtribución-NoComercial-SinDerivadas 4.0 Internacionalhttp://creativecommons.org/licenses/by-nc-nd/4.0/Tratamientos térmicosMartensitaFerritaMetalografiaCaracterización microestructural de un acero bajo carbono y contenido de manganeso cercanos al 1.5 %, templado a temperaturas intercríticas y revenidoIngeniería Mecánica - Tesis y disertaciones académicasTemplado del aceroTratamiento térmico de metalesMartensitainfo:eu-repo/semantics/openAccessMicrostructural characterization of a low carbon steel and manganese content approximately 1.5%, tempering at intercritical temperatures and temperingThermal treatmentsMartensiteFerriteMetallographyAbierto (Texto Completo)info:eu-repo/semantics/bachelorThesis